Pipe Rolling Machine

$15,000.00$48,308.00

CNC Section/Tube/Plate Roll Bender HNB Series

iEME CC series CNC roller bender is hydraulic driven, geared and knurled by electric motors.

Available in 5 driving forces i.e. 15, 25, 35, 50, & 70 ton.

SKU: N/A Category:

Description

Pipe Rolling Machine Features

Features
NC Control Hardware
  • Single radii per bar
  • Minor adjust of X shaft shifting up/down
  • Up to 30-pass roll forming
  • Vertical and horizontal working position
  • Work bench precisely machined from welded steel plate and heat treated
  • X axis repeat positioning accuracy 0.1mm
  • Front 2 shafts geared and knurled by one electric motor

 

Pipe Rolling Machine Specifications

HNB-12T HNB-25T HNB-35T HNB-50T HNB-70T
X-axis
Pressing power 12 ton 25 ton 35 ton 50 ton 70 ton
Positioning accuracy servo controlled 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm
Drive system Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic
Stroke(controlled) 200mm 300mm 400mm 500mm 600mm
Hydraulic oil volume 40 litres 90 litres 110 litres 160 litres 230 litres
Y-axis
Roller speed 28 rpm 22 rpm 18 rpm 16 rpm 8 rpm
Maximum torque per roller 550Nm 1600Nm 3000Nm 6000Nm 9500Nm
Drive system of front rollers Electric motor Electric motor Electric motor Electric motor Electric motor
Shaft height, extendible 220mm 280mm 330mm 420mm 550mm
Shaft diamter 50mm 80mm 90mm 120mm 130mm
Roller support Optional Optional Optional Optional Optional
Lower roller spacing 258mm 362mm 400mm 500mm 620mm
Z-axis
Manual Series Series Series Series Series
Others
Power connection 380V 50Hz 16.3A 380V 50Hz 28.7A 380V 50Hz 28.7A 380V 50Hz 32A 380V 50Hz 32A
Length/width/height 1249*1134*1432 2037*1300*1680 2050*1600*1680 2200*1900*1780 2450*2160*1890

Note: Technical data, capacities and specifications are not binding and may be modified without prior notice

Pipe Rolling Machine Bending capacity

HNB-12T HNB-25T HNB-35T HNB-50T HNB-70T
mm R min. mm R min. mm R min. mm R min. mm R min.
Round tube 2”(60) 300 4”(114) 600 φ180 600 φ200 1000 φ220 2000
Square tube 50/50/3 300 160/160/4 1000 100/100/10 1000 180/180/10 1200 250/150/10 1700
Angle(leg-out) 50/50/5 300 80/80/8 600 100/100/10 1200 120/120/10 1500 140/140/12 1500
Flat bar(easy way) 100/10 150 300/15 300 260/20 350 260/30 450 300/40 550
Flat bar(hard way) 70/12 300 120/15 1000 120/15 1000 200/30 600 300/35 2000
Solid round 30 150 60 500 φ80 500 φ90 700 φ100 800
Solid sqaure 30/30 150 60/60 500 80/80 700 90/90 1000 100/100 1000
C-Channel(easy way) UNP80 400 UNP180 600 UNP200 600 UNP260 1000 UNP260 1000
C-Channel(hard way) UNP80 400 UNP180 600 UNP200 600 UNP260 1000 UNP260 1000
T-Channel(easy way) 60/60/7 400 80/80/8 500 100/100/10 600 120/120/12 700 130/130/14 800
T-Channel(hard way) 60/60/7 400 80/80/8 500 100/100/10 750 120/120/12 750 130/130/14 1000

[/fusion_table]

Note: The minimum radii shown may require Multi-Pass.

Reviews

There are no reviews yet.

Be the first to review “Pipe Rolling Machine”

Your email address will not be published. Required fields are marked *

Go to Top